3 extremely simple steps to change WiFi name and password

In fact, how to change Wifi password is very simple, just a few steps is possible change Wifi name and password, GhienCongList will guide you specifically below.

Advertisement

Your Wi-Fi router comes with a default network name and password. Usually, both are printed on the router’s case. This article gives you the opportunity to change the name of your personal wifi rather than the generic names “NETGEAR30” or “Linksys”. You can also change to a new password that’s easier to remember. To do these things, you need to access the router’s admin interface. And to do that, you first need to find the local IP address of the Router on your network. Here are the steps change wifi name and password, please follow GhienCongListen to change them.

Step 1: Find your Router’s IP address

Most routers provide a web-based administration interface that you can access through your browser by entering the router’s local IP address. Your first step is to find that IP address.

Advertisement

Note: Some routers provide different administrative interfaces. For example, if you have an Apple Airport Router, you can use “Airport Utility” on your Mac to change its settings. Other router manufacturers offer smartphone apps to change settings, and even some of the more expensive routers are starting to integrate touchscreens. So be sure to check your router’s manual.

You will need to use a browser to access your Router settings interface. However, it’s best to do this from a computer as many routers don’t have web interfaces optimized for mobile and tablet devices.

Advertisement

On a computer running any version of Windows, the fastest way to find this information is the Command Prompt. To open Command Prompt, press Windows + R, type “cmd,” and then press Enter.

At the Command Prompt, type the command ipconfigand press Enter. In the results, look for the section that shows your current network connection. The router’s IP address is displayed to the right of the “Default Gateway” section.

In macOS, click the Apple menu, then select “System Preferences.”. In the System Preferences window, click the “Network” icon, select your Wi-Fi or Ethernet connection, and then click “Advanced…”.

Switch to the “TCP/IP” tab and find the Router IP address to the right of the “Router:” section.

Step 2: Open the Router manager with a web browser

Next, you’ll need to access the Router’s web interface. Open your favorite browser, here we choose Chrome, type the IP address you just found in Step One into the path bar, then press Enter.

You will be asked to enter your Router’s username and password to log in. If you’ve never changed these before, you’ll use the default credentials.

Usually, the default password is “admin” or just blank. On some Routers, the default account and password is “admin” or the username is “admin” and the password is blank. If the above methods do not work, you can try the password stored on the router’s case.

Step 3: Change the Wi-Fi network name and password

After logging into your Router, look for Wi-Fi settings. Depending on your router, they may be on the first page you see or in a section with names like “Wi-Fi”, “Wireless” or “Wireless Networks”.

You should see an entry named “SSID” or “Network name”.

To change your Wi-Fi password, look for a setting with a name like “password”, “passphrase”, “wireless key” or “WPA-PSK key”. Different routers use different names. We recommend using a fairly long wireless password, consisting of numbers and characters, or even using a phrase instead of a word.

After entering the new Wi-Fi network name and passphrase, you need to click “Apply”, “Save” or a similarly named button to save your settings.

If you have saved the Router’s settings over Wi-Fi, your device will disconnect when the Router turns off the old Wi-Fi network and displays a new network with the name you just selected. Some Routers need to completely reboot to change the new settings, so you may lose connection to the Router even if you are using a wired connection.

After the Router settings change, you will need to reconnect all your wireless devices to the new Wifi network with the new name and password. Your devices will not be able to connect until you do.

Above is how to change your Wifi password If you have any questions, please comment below for answers. Thanks for following the post.

Reference: howtogeek.com