The computer does not recognize the hard drive is one of the damage users may encounter during the use of laptops. So what is the cause of this situation and how to fix it? Find out with HC in the article below:
1. Causes and ways to fix the computer does not recognize the hard drive
There are many causes for your computer to fall into this unexpected state, here are details of each cause and how to fix it.
1.1. BIOS set to wrong mode
– If the HDD, computer hard drive is not found, the cause may be that the hard drive is disabled in System Setup. Some manufacturers tend to disable unused ports in BIOS by default.
– How to fix: To access BIOS on Windows 10 and activate the hard drive, follow the steps below:
+ Step 1: First on the “Start Menu”, find and click “Settings” (the cog icon).
+ Step 2: On the “Settings” window, find and click “Update and Security”.
+ Step 3: Scroll down to the “Recovery” section in the left pane.
+ Step 4: Next, click “Restart” in the “Advanced startup” section. This will boot your computer into a special menu.
+ Step 5: Select “Troubleshoot”.
+ Step 6: Scroll down to the “Advanced options” section.
+ Step 7: Select “UEFI Firmware settings” then select “Restart”.
1.2. Bad sectors damaged hard drive
– This error causes a certain area on the hard drive to be damaged, unable to write and read data.
– How to fix: To fix the above problem, you use software to check the status of the hard drive, if there is a bad sector, it is best to back up data to another device to avoid data loss.
+ Please download the software “HDD Regenerator” to help check and fix bad sector errors on Windows computers. At the main interface of the software, select “Click here to repair physical bad sectors” to start the process of checking and fixing bad sectors.
However, this is a temporary fix, bad sectors can spread and your hard drive is at risk of stopping permanently at any time. So, back up important data and plan to buy yourself a new hard drive.
1.3. Hard drive contact pins are dirty, poor contact
– Laptop dirty, dusty due to not being cleaned periodically, leading to dusty hard drive contact pins. This makes your laptop not recognize the hard drive.
– How to fix: Proceed to remove the hard drive from the laptop, then remove the hard drive pin to clean the dusty contacts. To avoid this situation from happening again, you should clean the laptop periodically every 6 months.
1.4. Rotating shaft, reading disc damaged
– Hard drive is noisy, often makes strange noises. The cause may stem from the rotating shaft, the reading disc has a problem and is likely damaged. This makes your laptop not recognize the hard drive.
– How to fix: Check and replace the rotating shaft for the laptop, of course, if you are not familiar with it, you should ask for the help of a professional repair technician.
1.5. Computer error does not recognize the hard drive because the hard drive does not rotate
– This error arises because the drive does not have enough power or the power level is not enough to work, and so the drive does not spin.
– How to fix the error The computer does not recognize the hard drive this, you do it in the following way:
+ In case your computer still recognizes the hard drive in the BIOS but when entering the boot does not appear, you need to check the SATA mode in the BIOS settings to see if it is in AHDI mode, then you must choose IDE mode. it will receive.
+ In case the BIOS does not recognize the hard drive, the mainboard has not recognized the hard drive, the cause may be the signal cable or the power cable. With this situation, you can change the signal processing cable to another and change another power cable port for the hard drive.
+ In case you have changed the signal cable and the power cable port but the machine still does not recognize the hard drive, the hard drive is damaged, there is no other way that you should replace the hard drive with a new one.
2. Laptop & computer do not recognize external hard drive, how to fix it
In addition to the hard drive device inside the computer, you may also experience errors The computer does not recognize the hard drive outside. Here are the causes and solutions you can refer to.
2.1. Damaged external hard drive connection cable
After a period of use, the cable connecting the external hard drive to the computer is damaged, especially at the connection end. This is a common error, the fix is quite simple, you just need to change another connection cable.
2.2. Connector pins are dirty
– On the hard drive with yellow connector pins, during use, dust will accumulate here and interfere with the operation of the hard drive, resulting in the laptop not receiving a signal from the hard drive.
– The way to fix a laptop that does not recognize an external hard drive is quite simple, you just need to use a soft cloth or an eraser to remove the stains on the connection pins of the external hard drive.
2.3. Unassigned activation hard drive (common)
To assign a name to the hard drive that leads to the computer not recognizing the external hard drive, you can follow these instructions:
– Step 1: Right click on “My computer”, select “Manage”.
– Step 2: The Computer Manage window appears, select “Disk Management”. Then right-click the removable hard drive icon on the window and select “Change Drive Letters and Paths”.
– Step 3: After a new window appears, click “Change” and then select the hard drive’s name according to characters from A to Z (Note that the name must not be the same as the drives already in the computer).
– Step 4: After completing you press “OK”. Then check if the hard drive is visible on the laptop by starting My computer.
2.4. Unpartitioned hard drive
– Partitioning the hard drive helps laptops and computers that do not recognize SSDs to detect and recognize external hard drives. To create a partition for the removable drive, go to “Disk Management” > right-click on the partition and select “New Simple Volume”.
>> See also: How to fix it error can’t call video on facebook on computerlaptop for those of you who do not know.
– If the above methods still do not save your problem, the last way is to reformat your hard drive by:
+ Step first: Go to “Disk Management”.
+ Step 2: Right-click the removable drive partition and select “Format”.
+ Step 3: Reformat to the “NTFS” standard.
– Note: This method only applies when the hard drive does not have important data, because after formatting the hard drive you will have many difficulties in getting the data back. If your hard drive is storing important data, it is best to back up its data to another device before reformatting.
With status information The computer does not recognize the hard drive above, wish you a successful fix and have a satisfied experience. Thanks for following the post.
TechtipsNReview.com
Source: Causes & ways to fix the error that the computer does not recognize the hard drive
– TechtipsnReview
