How to connect a wired network for a Windows 10 laptop very easily

How to connect to a wired network for a Windows 10 laptop is one of the information that many people are interested in when playing games or downloading data because of the stability of this type of connection. If you do not know how to do it, do not skip the following article!

1. Instructions on how to connect to a wired network for Windows 10 laptops

To connect to Ethernet, you need to prepare:

– Router is also known as Router.

– Ethernet cable with square plug used to connect the computer to the router and connect the modem to the router.

– Modems.

– Computer, laptop Windows 10.

Proceed as follows:

Step 1: Connect the Internet terminal to the modem.

Step 2: Plug one end of the Ethernet cable into the “Ethernet” port on the modem.

Step 3: Plug the other end of the cable into the router.

Step 4: Plug the router’s power cord into the power source. Temporarily, we have connected the modem to the router as shown below.

Step 5: Using another Ethernet cable, plug one end into the router.

Step 6: The other end of the cable connects to the laptop.

Step 7: After the connection is complete, make sure the cable ends again.

That’s it, you’re done how to connect to a wired network for windows 10 laptop or the way to connect the wired network for Win 7 laptops is also similar.

2. How to check the laptop’s connection to the wired network

Step 1: Go to “Start” > Select “Settings”.

Step 2: Select “Network & Internet”.

Step 3: Select “Ethernet” > If “Connected” is displayed, it means the connection is successful.

3. Instructions for setting a higher priority wired network connection

Although you have connected the laptop to a wired network, the device connects to the previous wireless network as the default connection. Then to fix the error laptop not receiving wired network, you set the priority of the wired network connection over the WiFi connection. Here’s how to do it:

Step 1: Press the “Windows+R” key combination to open the Run command window.

Step 2: Enter the command “ncpa.cpl” and press “Enter”.

Step 3: The Network Connections interface opens, press the “Alt” key to display the classic menu bar > Click on Advanced and then select “Advanced Settings”.

>> See more: Check laptop battery status either using the software or not using it is very easy.

Step 4: Here the user will see the network connections. To set the laptop to prioritize using a wired connection, select Wifi and then click the green arrow pointing down. The Ethernet connection will automatically be pushed up, which means that the laptop will consider the wired network connection as the number one priority.

With the above information, I wish you to make it how to connect to a wired network for windows 10 laptop be successful and have satisfactory experiences.

TechtipsNReview.com