How to fix error 0x80070035 in LAN successfully 100%

NOTE: Welcome to the Knowledge Sharing Blog! If you encounter any errors during use, such as error in download link, slow loading blog, or unable to access a certain page on the blog … please notify me. via Contact page. Thanks!

Yes, in the previous articles, I have shown you how to connect to LAN on Windows operating system.

And during the connection process, using LAN, it is not always smooth, there are times when there are errors, the problem is more or less.

Especially in the case where many computers use the same printer, there are even more problems arising from LAN use.

Some articles related to LAN are already on the blog that you should read, but if you are new to LAN, you must read it to do it.

In addition to the above background articles, if you want to learn more about LAN, you can click here to see more.

I. Error description 0x80070035 (error Windows cannot access…)

Yes, this error appears when you access another computer on the same LAN, the error content is as follows:

Check the spelling of the name. Otherwise, there might be a problem with your network. To try to identify resolve network problems, click Diagnose.

I-do-not-do-not-to-be-carry-lan (2)

II. How to fix Windows cannot access … (0x80070035)

There are many ways to fix this, please try each one in turn until it is ok. If you successfully fix the error with any error, then comment again at the bottom of this article.

See more:  Bring macOs Spotlight Search to Windows 10

Method # 1: Temporarily turn off anti-virus software on the computer

Anti-virus software is the main cause in many cases of being unable to access your LAN, anti-virus software’s firewall will sometimes prevent you from accessing other computers on the same LAN.

Therefore, you should try to turn off anti-virus software first. If after shutting down but you can access it again, the cause is 100% due to antivirus software.

Once you know the cause, reset the firewall in your antivirus software. If it is Avast, configure the network type as Private Network instead of Public Network Please.

Way # 2. Reset NetBIOS Setting

Note: You do this on both machines (the computer you and the computer you want to connect to).

Yes, I have applied this way to Fix successful errors for my case. You do the following steps:

+ Step 1: Open the Run dialog box (Windows + R) => then enter the command ncpa.cpl => and press Enter to access the window Network Connections.

Rotten-do-no-go-to-be-brought-lan (4)

+ Step 2: Window Network Connections appears, right-click on the network you are using => then select Properties.

The-do-not-do-not-to-be-carry-lan (5)

+ Step 3: Next, you double click on the line Internet Protocol Version 4 (TCP/IPv4) => select Advanced in the next window.

The-do-you-do-no-go-to-be-carry-lan (6)

+ Step 4: In the window Advanced TCP/IP Settings => you switch to the tab WINS => and drag down the section NetBIOS setting => and tick the line Enable NetBIOS over TCP/IP => press OK to save.

Trouble-shot-not-to-be-carry-lan (7)

And here is the result, I tried to access the server again (the machine installed that printer), then it was successful as shown below.

See more:  How to permanently delete data on a computer that cannot be recovered

Daddy-not-to-be-with-to-be-spread (3)

Method # 3: Enable TCP / IP NetBios Helper

Note: You do this on both machines (the computer you and the computer you want to connect to).

+ Step 1: You open the Run dialog box (Windows + R) => then enter the command services.msc => find the line TCP/IP NetBios Helper as shown below => then you can double click, or right click and select Properties.

The-do-you-do-no-go-to-be-carry-lan (1)

+ Step 2: In section Startup type => You switch to the state of Automatic => click the button Start => and select OK.

I-do-no-go-to-be-carry-lan (8)

+ Step 3: After the setup is complete, restart your computer to check the results.

Method # 4: Set up in Local Group Policy Editor

+ Step 1: You open the Run dialog box (Windows + R) => then enter the command gpedit.msc => then access to the following path:

ComputerConfig WinSetting SercuritySetting LocalPolicy SecurityOption

=> Then look for the line Account: Limit local acc use of blank password to console logon only => then double click on that line => and select Disable to disable this policy.

Loans-not-to-be-carried-lan (9)

+ Step 2: Likewise, find and double-click on the line Network access: Sharing and security model for local account => then select is Classic - local users

The-do-not-not-to-be-carry-lan (10)

+ Step 3: Finally, open the CMD window => and run the command gpupdate /force to update gpedit again. Or if you find it difficult for you to use the command, just restart your computer to apply it.

=> Now try to access the LAN again.

______ If not, try the following:

You access the following path:

Computer Configuration Windows Settings Security Settings Local Policy Securiy Options

=> You go to the line Network security : LAN Manager authentication level => double click on this line!

See more:  What is Last BIOS Time on Windows 10, and how to reduce it?

sua-loi-mang-lan-11

Then choose again Send LM & NTLM -user NTLMv2 senssion security if negotiated => then press Apply => select OK => and restart the computer to reconnect.

sua-loi-mang-lan-12

III. Epilogue

The above are simple and effective ways to help you successfully overcome error 0x80070035 (Windows cannot access…) when connecting to LAN on Windows operating system.

In addition to the above methods, if you have successfully overcome this error in any other way, do not forget to share again under the comments of this article for you to learn and exchange more.

Hopefully this article will be useful to you, wish you success!

Kien Nguyen – techtipsnreview

Note: Was this article helpful to you? Don’t forget to rate, like and share with your friends and relatives!

Source: How to fix error 0x80070035 in LAN successfully 100%
– TechtipsnReview

Leave a Reply

Your email address will not be published. Required fields are marked *