By default, Laptops when connecting to the wireless as well as wired internet will often prioritize wired connections. However, for some reason, your laptop does not accept the wired network and you really don’t know how to handle it, especially when you are not very knowledgeable about computers. Refer to the following article with solutions fix laptop not receiving wired network which you can manually handle this problem.
Fix laptop not receiving wired network
How to fix laptop not receiving wired network
1. Check network status
– If the computer is connected to a network cable, but the network status icon in the system tray in the lower right corner of the screen has a mark X red, it means the computer has not received the connection or is not activated. Now you need to check the Local Area Connection icon, if it’s gray or says Disabled, it means that the wired network connection has not been activated, so right-click, then select Enable. After a few seconds, the icon will light up.
– Next, check to see if the network wire is broken or broken. Check if the wire attached to the computer and the router has good contact, specifically, unplug the network cable and attach it to another network port on the Router. If the computer connects to the wired network successfully, it means that a network port on the router is faulty. And if changing the network port on the router still doesn’t solve the problem, try replacing a different network cable.
– If the network icon shows an exclamation mark, it means the network is not connected properly. To fix this error, please read and refer to the tutorial article again fix network error with yellow exclamation point we have shared before.
2. Check the network card driver
In many cases, users reinstall the operating system themselves but forget to install computer drivers and especially network card drivers.
Step 1: Press the key combination Windows + CHEAP and enter the command devmgmt.msc in the Run dialog box and then press Enter or OK
Step 2: Double click the item Network adapters, you make sure the driver is still working properly (no yellow exclamation mark). If there is an exclamation mark, download the correct network card driver with the device code and reinstall it.
If you have installed the correct driver, check if your Internet provider (ISP) is working properly and check if you need a broadband connection (PPPoE). You can follow the steps below to create a broadband connection:
Step 1: On the user interface, you click on the icon Windows on the keyboard and enter a keyword control panel then click on the corresponding result.
Step 2: The Control Panel dialog box opens, click on the item View network status and tasks as shown below.
Step 3: Next, tap Set up a new connection or network
Step 4: Double tap option Connect to the Internet Later
Step 5: Click Broadband (PPPoE)
Step 6: Enter information Username and Password provided by your ISP and then press Connect
Thus, the above are the basic steps for readers to fix the laptop not receiving the wired network quickly. In addition, for laptop users, the errors that arise during use are quite a lot and as simple as the error of not receiving USB, which also causes many people a headache. However, readers do not worry because through the tutorial article fix laptop not recognizing USB Before that, readers can completely fix this error so as not to interrupt their work.
laptop not receiving wired network
laptop does not receive network, laptop error does not receive wired network,
Source: How to fix laptop not receiving wired network