How to fix the error Win 10 fails to boot

You just upgraded or installed Windows 10 operating system and when you try to start your computer, you discover that Windows 10 is not booting? If this is the situation you are experiencing, try the solutions below to see if they resolve the Windows 10 boot issue.

1. Confirm that the computer has completed the POST process

In many cases Windows 10 fails to boot, the computer may not be able to control the operating system. If you start the computer and the POST bar is completely full, then disappears, it has successfully completed the POST process.

2. Disconnect any external devices

Disconnect any external devices
Disconnect any external devices

Sometimes the hardware can interfere with the normal boot process of Windows. In this case, unplug all devices connected to the computer such as printers, scanners, digital cameras, video recorders, USB devices, CDs / DVDs, MP3 players. , memory card reader, and any other peripherals you have plugged in. Keep only the mouse, monitor and keyboard (if using a PC).

After doing this, unplug the computer from the wall outlet, remove the laptop battery, hold the power button for 10-15 seconds, then reconnect the power outlet and reboot.

3. Check the specific error message you received

You can check online for the specific error message you get when Windows 10 fails to boot. Such messages include black screen or blue screen of death errors and how to fix them.

Check for the specific error message you received
Check for the specific error message you received

“Windows Failed to Start” 0xc00000f

One of the most common error codes associated with Windows 10 not starting is “Windows Failed to Start” 0xc00000f. The most commonly cited reason for this is an error in the BCD (or Boot Configuration Data).

“Windows Failed to Start” 0xc00000f is one of the most common error codes

The best way to fix this error is to fix the BCD. Please do as follows:

After you have the recovery media, insert it into your PC, then restart your PC. The machine will boot straight into the recovery media. (If not, you’ll have the option to choose a recovery drive when your PC is starting up). Click next on the screen Windows Setup, then click “Repair your computer”.

See more:  How to change the default Download folder on Windows 10/8/7

Transfer to Troubleshoot> Command Prompt, then enter the following commands:

bootrec /FixMbr
bootrec /FixBoot
bootrec /ScanOs
bootrec /RebuildBcd

After that last command, enter exit in Command Prompt, press Enter and restart your PC (no installation media needed).

4. Check motherboard connection

Check motherboard connection
Check motherboard connection

If you get a completely blank screen when Windows tries to boot, then it may be better to look inside to make sure all hardware is properly inserted as usual. Here are the main ingredients you should consider:

Memory / RAM: RAM is in the form of thin, thin bars that can easily pop out if you accidentally do something with your computer. Modern laptops usually keep the RAM in a compartment on the underside, which means you don’t need to open the entire machine to check the RAM. Open the RAM compartment, take out the RAM and plug it back in to make sure it’s securely connected.

Operating system hard drive: Another possibility is that your primary Windows hard drive has disconnected from the motherboard (or power supply). Firmly press the SATA cable and make sure it is also connected to the PSU.

PCI-E card: Less likely – but it’s still possible – a disconnected GPU or other PCI-Express device might prevent Windows from starting. Make sure all devices are connected properly.

5. Start up in Safe Mode

Safe Mode starts your computer with limited files and drivers, but Windows will still run. To see if you have Safe Mode turned on, you’ll see words in the corners of the screen. Reference: How to enter Safe Mode Windows 10 at startup to know how.

If the Windows 10 not booting problem persists, check if it happens while your computer is in Safe Mode.

If the problem of Windows 10 not booting does not occur while in Safe Mode, then your default settings and basic drivers are not contributing to the problem.

If this doesn’t help, try the next solution.

Performing a reset allows you to choose which files you want to keep or delete, then reinstall Windows.

See more:  Please download wallpaper Surface Laptop 4

Note: All your personal files will be deleted and the settings reset. Any apps you installed will be removed, and only the pre-installed apps that came with your PC will be reinstalled.

If Windows 10 won’t boot after the upgrade, use System Restore while in Safe Mode to create a restore point when you install new apps, drivers, or Windows updates, or when you create a restore point manually.

Restoration does not affect individual files. However, it will remove apps, drivers, and updates that were installed after the restore point was created.

8. Perform automatic repair

B1: Insert the USB or Windows installation disc, and then restart the computer. You will see a message asking you to press any key to boot from DVD (Press any key to boot from DVD).

B2: Press any key to boot from DVD.

B3: When you see the page Install Windows is displayed, click Repair your computer to launch Repair your computer.

B4: In WinRE, go to the screen Choose an option.

B5: Click Troubleshoot.

B6: Click Advanced Options.

B7: Click Automatic Repair.

To do this, you need to download Windows 10 ISO then create Media Creation tool, you can do this from another computer.

Note: If you don’t see the message Press any key to boot from DVDYou need to change the boot order in your BIOS settings in order to boot from disk or USB.

Be careful when changing BIOS settings as the BIOS interface is designed for advanced PC users. Changing the settings may prevent your computer from booting properly.

You should only update the BIOS if necessary, as when resolving compatibility issues. It can be complicated and render the computer inoperable in case of any errors.

Follow the steps below exactly to change the boot order, then do the repair:

B1: During the reboot, check for any instructions on how to normally interrupt the boot.

B2: Into the BIOS Setup Utility. Most computers use keys F2, F10, ESC or DELETE to start this setup.

B3: Find a tab in the BIOS setup utility labeled Boot Order, Boot Options or Boot.

B4: Use the arrow keys to jump to Boot Order.

See more:  How to enable God Mode on Windows 11

B5: Press Enter.

B6: Find the removable device (CD, DVD, or USB flash drive) in the list Boot.

B7: Use the arrow keys to move the drive upwards to appear in the first position in the Boot list.

B8: Press Enter.

B9: The boot sequence has now been changed to boot from a DVD, CD or USB flash drive.

B10: Press F10 to save changes and exit BIOS Setup Utility.

B11: Click Yes in the confirmation window.

B12: Your computer will reboot normally.

B13: Let the scan run for a few minutes and remove any malware that infects your computer.

B14: Choose your preferred language, currency, time, keyboard or other input method.

B15: Press Next.

B16: Click Repair your computer.

B17: Select the operating system you want to repair (in this case, Windows 10).

B18: Press Next.

B19: On the screen Choose an option, Please choose Troubleshoot.

B20: Choose Advanced Options.

B21: Click System Restore or Startup Repair.

Once the repair is complete, check if the Windows 10 boot problem goes away or not, if not, try next solution.

9. Connect various video outputs to the computer

You can try different video output combinations, such as the one below and see if the Windows 10 boot problem persists:

Connect another adapter from integrated graphics to discrete graphics or vice versa

Connect to another output from HDMI to DVI, DisplayPort to VGA or any other combination

10. Boot into Safe Mode with Networking

B1: Restart the computer.

B2: When the login screen is displayed, hold the key SHIFT while you choose Power> Restart.

B3: After the computer reboots to get to the screen Choose an option, choose Troubleshoot.

B4: Click Advanced options.

B5: Click Startup Settings.

B6: Click Restart.

B7: When it reboots, you will see a list of options. choose 5 or F5 for Safe Mode with Networking.

Safe Mode with Networking starts Windows in Safe Mode, which includes the network drivers and services you need to access the Internet or other computers on the same network.

Once in Safe Mode, you can do the following to try and solve the Windows 10 not booting problem:

Do a Clean boot to get rid of any software conflicts that might be causing the problem.

Performing a Clean boot for your computer helps to reduce software-related conflicts that can explain the root cause of Windows 10 boot failure. These conflicts can be caused by applications and services starting and running in the background whenever you start Windows normally.

See more:

Source link: How to fix the error Win 10 fails to boot

– https://techtipsnreview.com/

, , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *