[Tuts] 5 ways to fix “Has stopped working” error on Windows 7/8 / 10

[Tuts] 5 ways to fix "Has stopped working" error on Windows 7/8 / 10

NOTE: Welcome to the Knowledge Sharing Blog! If you encounter any errors during use, such as error in download link, slow blog loading, or unable to access a certain page on the blog … please notify me. via Contact page. Thanks!

If you have been a computer user for a long time, surely Has stopped working errors Not too strange to you anymore, right? This error, it does not exclude any software / application or a program at all … any software / application can have this error.

So what is the Has stopped working error and why is it that? I didn’t do anything 😀

I. What is Has stopped working error?

Do not know how to describe but when a software / application…. If something has stopped working, it will not be able to start the program anymore. Instead, a bulletin board with a title like the image below or something similar:

loi-Has-stopped-working-1

II. What causes Has stopped working error?

There are many causes of the error, and it is difficult to know where it is. The Has stopped working error can be caused by:

  • Viruses, malware …
  • Because the hard drive is fragmented.
  • Due to software conflicts installed on the operating system.
  • Error due to RAM.
  • It could also be that the video card installed is faulty or the Driver is old and out of date.

Those are some of the reasons that can lead to Has stopped working errors. So how to solve this problem quickly and effectively.

III. How to fix Has stopped working errors?

Well, in this article I will share with you some of the ways that I think are the most OK, so that those who are experiencing such errors can be resolved quickly and accurately.

#first. Editing in Registry (recommended)

1.1: How to do it manually

+ Step 1: Open the Run dialog box (Windows + R) => enter the command regedit => press Enter to access Registry Edit.

+ Step 2: Next, you access the following path:


HKEY_CURRENT_USER Software Microsoft Windows Windows Error Reporting

loi-Has-stopped-working-2

+ Step 3: Double click on the key DontShowUI => then at section Value data you value instead 0 into value 1 => select OK is done.

loi-Has-stopped-working-3

+ Step 4: Once done, Restart your computer to apply the changes. And from now on, you will probably no longer see this Has stopped working error appearing.

1.2: How to quickly work with pre-made * .reg files

If you do not want to do it manually above, you can download the file you have prepared below. Download just double click to change the value 0 into value 1.

Download link / Link backup

=> After you are done, restart your computer to apply the change.

#2. Disable some applications running in the background to avoid software conflicts

+ Step 1: Open the Run dialog box (Windows + R) => enter the command msconfig => press Enter to perform.

+ Step 2: You switch to the tab Services To disable applications running in the background by:

Perform: Checkmark Hide all Microsoft services => then press Disable all to disable all of these Seriversexcept for MS Services.

Important: You remember to tick the line Hide all Microsoft services Please. If not checked when restarting will not be able to enter Windows. At that time, I wasn’t responsible 😛

Loi-Has-stopped-working-4-min

+ Step 3: Reboot your computer and see the results.

# 3. Defragment your hard drive

As I said above, this Has stopped working error can also be due to your hard drive partition being fragmented, you can use a tool available on Windows to defrag the hard drive (Click link to see instructions if you don’t know how to do it).

Note: Prioritize defragmentation for the partition that contains the Windows operating system first, usually the drive C guys.

# 4. Use Disk Cleanup tool in combination with Ccleaner

Errors are sometimes caused by temporary files and junk files. Therefore, you should use this combination of tools to clean your computer clean.

About how to use, I already have very detailed articles, if you do not know how to use it, you can review the instructions:

# 5. Using antivirus software to handle Has stopped working errors

You should use copyrighted anti-virus software like Kaspersky, Avast, Bitdefender…. to remove viruses as well as protect your computer from viruses.

Also, you can refer to the free anti-virus software that I shared with you before. While not as effective as the paid software, it still kills basic viruses.

Perform: Scan for viruses => then delete the infected files, then restart the computer to apply the changes.

IV. Advice

I see that many of you now like to use multi-configuration versions of Ghost that are shared on the network. If it is a personal computer, I recommend that you install Win yourself for stability.

It takes a bit more time, but in return is much more performance. Since many shared ghosts nowadays they have disabled quite a few Serivers and optimized the parts they deem “unnecessary”.

For those who know a little about computers, they can re-activate, the rest of them when they get an error, they will give up, do not know which way to re-activate, thought the operating system is faulty but actually not it must be.

Finished, you take the effort to find another ghost version and the ghost will play again, so it takes longer than installing Win 😀

Epilogue

Well, above are the 5 ways that I find the most effective Has stopped working errors when opening any software, game or application on Windows operating system.

OK, in addition to the 5 ways that I have shared above, if you know any other effective ways, don’t forget to share them for everyone to use.

Hope this article will be useful to you, wish you success!

Kien Nguyen – techtipsnreview

Note: Was this article helpful to you? Don’t forget to rate, like and share with your friends and relatives!

Source: [Tuts] 5 ways to fix “Has stopped working” error on Windows 7/8 / 10
– TechtipsnReview

Be the first to comment

Leave a Reply

Your email address will not be published.


*