[UEFI/ LEGACY] Create USB Multiboot 2019

[UEFI/ LEGACY] Create USB Multiboot 2019

NOTE: Welcome to the Knowledge Sharing Blog! If you encounter any errors during use, such as error in download link, slow loading blog, or unable to access a certain page on the blog … please notify me. via Contact page. Thanks!

Well, so after more than 2 years, the author will finally end up Bui Minh Binh and the authors also released a powerful version of Multiboot 2.3.0.

This version has been out for a few days, and by the way, I also thank you @SUCCESS has continuously reported the latest information about the advent of the computer rescue tools that I love so much, the last time Anhdv Boot 2019 was the first time you informed me. Admittedly, your information was too fast and dangerous 😀

And right after receiving information about a new version, I immediately downloaded and tested it. Overall still as delicious as ever ^^

I talk a little bit about the author Bui Minh Binh for you to understand, I’m not sure the author was the creator of the first UEFI USB BOOT, but one thing that I firmly believe is: one of the first to create USB BOOT with hidden partition.

This means that after creating USB BOOT, your USB will be divided into 2 partitions, 1 boot partition with FAT32 format to be able to boot on both UEFI and LEGACY standards. And the second partition with NTFS format is to hold data, can store files over 4GB.

I already have a few articles about the author’s Multiboot versions, and I have never missed a version of yours. 😀 Some articles that you can see and use if you want:

I. Who is this Multiboot for?

Let me tell you briefly for easy visualization, the effect of this Multiboot is to rescue the computer, repair the computer, install Win, install Linux…. like other tools. However, it’s much more powerful and full-featured.

It can be said that Multiboot is a framework that you can easily customize to use according to your needs. This means that Multiboot itself does not include any WinPE versions or tools (only a few built-in tools are available).

Therefore, if you do not have much time and do not like to learn, then Multiboot is not for you!

Other rescue tools like Anhdv Boot, HKboot, DLC Boot…. All applications, software, WinPE… are packaged together in a file / folder, and after you download it, you just need to use the 1-click Tool included to create it.

As for Multiboot, what you want to use, you can choose to integrate it yourself. You can integrate Anhdv Boot, NKboot and DLC Boot … into Multiboot if you want 😀

II. What to prepare to create USB Multiboot?

1 / A USB, the minimum is 4 GB.

2 / Download Multiboot (version 2.3.0) here or here or here !

UPDATE the latest Multiboot 2.3.1 set: here or here or here ! (Recomend using)

NEW UPDATE: Version available 2.3.2 Beta, brothers like can download here (Change log here)

3 / Tools, applications, WinPE … that you want to integrate into Multiboot.

4 / And importantly, read through the article before starting. OK!

The author is developing the version Multiboot 2.3.1 to Fix some bugs in version 2.3.0. Please Bookmark this article to follow up when the latest version is available.

Take each step at a time, you guys ……………………

+ Step 1: After downloading the Multiboot, extract it => there will be files as shown below.

tao-usb-multiboot-2019 (5)

+ Step 2: You open the file Module List.xlsx to download the necessary tools. This is the Excel file that contains the link to download the kit we need 😀

Or watch live here !

Extremely complete and I have specific notes already ^^

tao-usb-multiboot-2019 (7)

Download the tool you want. For example a USB BOOT, you should download the following basic things: Mini Windows 10 (anhdv), Mini Windows XP …

+ Step 3: Ok, after all the sets have been downloaded WinPE but you need it => now please copy all to the folder Modules of the directory Multiboot-Toolkit 2.3.0 that you have unzipped in Step 1 Please.

tao-usb-multiboot-2019 (6)

+ Step 4: Basically like that. What you need, you download and put in the corresponding folder as in the Excel file is finished 😀

Well, one more important note is this: As for files ISO If you want to integrate, after you download, please rename the file to the corresponding name (same as in the Excel file) before copying and corresponding folders. For example this …


________________ read more if you like ____________________
_____________ how to integrate newer WinPE sets _____________

In the download link of the author (link in the Excel file), the WinPE versions of Anhdv are the 2017 version. If you want to integrate the latest WinPE versions (version 2019), you do as follows:

+ Step 1: Download Anhdv Boot 2019 about => then open the file Anhdv_Boot_2019.iso as shown below.

tao-usb-multiboot-2019 (1)

+ Step 2: Two folders Apps and WIM will contain the files we need.

tao-usb-multiboot-2019 (2)

Specifically as follows: In the directory Apps There will be files as shown below.

tao-usb-multiboot-2019 (3)

In the directory WIM There will be files as shown below.

tao-usb-multiboot-2019 (4)

Please copy all these files into the directory Modules is to be.

Yes, and quite like that, for tools like DLC BOOT or HKboot, you can also extract WinPE by the same way 😀

III. Instructions for creating USB Multiboot 2019

Ok, now we will start creating USb BOOT with Multiboot. Overall is also very simple!

+ Step 1: Please right-click on the file Extra-Features.bat => and select Run as administrator to run as administrator.

tao-usb-multiboot-2019 (8)

+ Step 2: A new window appears, you enter your choice 11 => and press Enter.

tao-usb-multiboot-2019 (9)

+ Step 4: Enter your USB location, in my case the number 2 => press Enter.

tao-usb-multiboot-2019 (10)

+ Step 5: Here I will put the USB in MBR format. I enter the number 2 and press Enter.

tao-usb-multiboot-2019 (11)

And please wait for the converting process to finish, you will be notified of the success. And the CMD window disappears automatically.

tao-usb-multiboot-2019 (12)

+ Step 6: Continue, right-click on the file Install Multiboot.bat => select Run as administrator to run as administrator

tao-usb-multiboot-2019 (13)

The next window you click Enter.

tao-usb-multiboot-2019 (14)

Enter the USB serial number. Mine is number 2Please enter it correctly.

tao-usb-multiboot-2019 (15)

+ Step 7: This step is quite similar to the step of creating USB BOOT with Anhdv Boot that I showed you earlier, so I will copy the instructions as follows:


By default, the author to this BOOT partition is 50 MB. If you want to integrate more Bitdefenter then you have to add 700MB. That means your hidden partition will have a capacity of 50 + 700 = 750 MB.

Or if you want to add Fedora to USB BOOT, you must add 1600 MB to it… .., that is 1600 + 750 = 2350 MB (more than 2 GB) …

……………. Just like that, if you want to integrate additional ISO files in the column in the table below, you add each of that MB. The more you want to integrate more, the capacity of the hidden partition will increase and the partition to store data will be less.

=> This step I do not want to integrate anything more, I click y and press Enter.

tao-usb-multiboot-2019 (16)

Continue to press Enter and Enter in 2 next step.

tao-usb-multiboot-2019 (17)

+ Step 8: And the process of copying files to USB is going on. Please wait …

tao-usb-multiboot-2019 (18)

+ Step 9: After the copying process is finished, please remove the USB and check that the folders such as APPS, WIM in the USB have files like Apps.wim, Apps64.wim, Drv10x32.wim, w10pe64.wim …… Not yet.

Note: A few cases performed on Windows 10 with the wrong partition hidden. This means that the BOOT partition is visible, and the USB-DATA partition is hidden. You just need to follow Step 4 In the article how to create this hidden usb boot partition is done.

If yes, then OK, you go to the USB BOOT Test step right away!

Some ways to test the capabilities of the most professional USB Boot today using a virtual computer:

On the contrary, if you don’t see anything. If the two folders are empty, please do the extra steps below.

+ Step 10: You copy all the files in the directory Modules that you have prepared earlier into the USB. Like this…


After copying is complete, run the file .addmodules.bat in the USB so it can move the files you just copied to the respective folders on the USB.

tao-usb-multiboot-2019 (19)

+ Step 11: Let’s test it…. Test results I will provide below

IV. Some pictures of the boot modes of Multiboot version provided by the author

V. How to integrate DLC BOOT 2019 into Multiboot

You can download DLC BOOT 2019 if you haven’t already.

It’s very simple, you just need to copy the file DLCBoot.exe and directory DLC1 Your USB is done.


BECAUSE. And here is the image that I tested on a real computer

Yes, that is already quite detailed, right, I just tested it preliminary. Rest here is your job, let’s explore and come on 😀

VII. Windows integration into Multiboot, Antivirus integration .. etc, cloud clouds …

This trick, please review the article how to create USB Multitboot earlier. I have not had time to test it yet, so it is not clear how integrating the Windows installer still works.

Please try it out, because this post also took quite a while ^^

VIII. Watch the video tutorial detailing how to create USB Multiboot 2019 by co-author

You can download the video here!


So I just gave you very detailed instructions on how create USB Multiboot 2019, the latest version for now.

Let’s experience it now, friends. And do not forget to share the bugs, good tips that you know about this Multiboot.

Good luck !

NOTE NOTE: In addition to this Boot version, you can visit the CREATE USB BOOT section to choose for yourself a suitable computer toolset. Former agent always, spoiled for you to choose, full standard ^^

Kien Nguyen – techtipsnreview

Note: Was this article helpful to you? Don’t forget to rate, like and share with your friends and relatives!

Source: [UEFI/ LEGACY] Create USB Multiboot 2019
– TechtipsnReview

Be the first to comment

Leave a Reply

Your email address will not be published.