What is XMP? Enable XMP on BIOS/UEFI to optimize RAM

For many gamers, or those who use computers for heavy work (such as editing movies, making graphics, rendering videos, etc.), their desire is to own a computer with a configuration. huge figure.

If you have previously known that CPUs and GPUs can OverClock (overclock) to increase power, RAM can do it too. Yes, and XMP on RAM is a function that allows the system to use RAM to its fullest extent, which increases the available power of that Ram to the maximum.

And XMP is also the answer for those of you who are wondering why RAM does not work properly with the number of BUS (processing speed) as announced by the publisher.

Maybe you are looking for:

#first. What is XMP?

xmp-tren-ram-la-gi (1)

XMP (Extreme USAemory Profile) is a technology developed by Intel with the purpose of adjusting the speed of the Ram stick to the highest possible level. This means that when the XMP feature is enabled on RAM, the performance of RAM will be higher than the default level that the CPU supports.

Usually, computer systems have a certain amount of RAM usage, even if you install a stick of RAM with a higher speed, the system will only receive at the preset level.

So, XMP was born to remove this barrier by interfering with the system and increasing the clock speed of the Ram to the highest possible level, and it will limit the error problems that arise when increasing the clock.

See more:  Automatically turn on NumLock when booting the computer 100% successfully

#2. How does XMP work?

When you start the computer, the BIOS / UEFI will activate a chip (SPD) mounted on the RAM to adjust the clock level as well as the delay (delay) of RAM.

XMP is an extension on the SPD chip, it is responsible for automatically adjusting RAM so that the RAM stick always operates at the highest clock speed.

In case you don’t have XMP enabled, that’s okay, the computer is still working fine. However, RAM will only run with the default parameters that the CPU supports.

I take an example to make it easier for you to imagine: You have a DDR4 RAM stick with a speed of 3000MHz, but the current chip on the machine is Intel Core i5-10400 => now, the amount of RAM that the computer uses Actual usage is only 2400MHz or 2666MHz only. Can’t get to 3000MHz if you don’t enable XMP.

#3. XMP is not OverClock (OC) RAM

xmp-tren-ram-la-gi (1)

Many readers here will mistakenly believe that XMP is overclocking Ram, but in fact it is not. Basically, both increase the Ram clock, but XMP is to increase the clock to the extent that the manufacturer allows, and overclock [OC] is to break the limit set by the manufacturer.

This also directly affects the component durability of these two methods. As you all know, to overclock, you need to increase the input power to increase the pulse high, this if not careful can cause Ram damage due to overvoltage.

As for XMP, it is safer, all parameters to increase the clock have been designed for the Ram stick, so it has almost no effect on the durability of Ram.

See more:  Introduction 5 software to recover data from hard drive erased extremely well!

#4. What should be noted when enabling XMP on RAM?

xmp-tren-ram-la-gi (3)

  1. The mainboard system (motherboard) of the computer must support XMP and it is best to use the mainboard of the famous brand (with a high level of reputation), which has a long life in the mainboard market.
  2. You should also update the BIOS to the new version for your motherboard, to make sure there are no errors when enabling XMP. Because usually, through each BIOS upgrade version, the errors will be fixed, as well as it works more stable.
  3. Minimize self-scratching! Yes, normally, XMP is completely automatic, you just need to enable (switch to ON) and you’re done, but in some cases there are different customizations, if you don’t have enough knowledge, you should leave everything as is. parameters as default.
  4. Not every XMP will make the machine faster, usually when XMP, the overall speed of the computer will be faster because the data is loaded faster, but it is not true in all cases. Computer speed depends on both software and other hardware, so look carefully and carefully optimize every bit.

#5. Is enabling XMP in BIOS/UEFI dangerous?

As I said above, XMP it is not overclocked so there will be no danger at all, all works within the manufacturer’s permission.

All have been carefully tested before being shipped, all parameters such as voltage, delay, clock speed … have been guaranteed to be safe, so you can rest assured to use it.

#6. How to enable XMP for maximum RAM performance?

It’s also very simple, but you must know how to access BIOS or UEFI first. If you don’t know, read this article:

See more:  How to Fix boot EFI, fix error due to loss of EFI partition (UEFI standard)

Each Mainboard line, each manufacturer has a different BIOS / UEFI interface => so you have to figure it out yourself.

In general, you just go to BIOS / UEFI and search for XMP => then activate (Enable) it up is okay.

kich-hoat-xmp-in-bios-1

Or

kich-hoat-xmp-in-bios-hoac-uefi

However, I also need to note to you that not all computers can activate XMP.

  • I take for example that the mainboard does not support XMP, or because the BIOS version is too old, has not been updated for a long time, so it does not have that feature.
  • Or simply the RAM doesn’t have the XMP feature.
  • Or it could be because the CPU chip is not compatible with the clock level when XMP of the RAM is enabled.

#7. How to check if the computer has XMP enabled?

It’s very simple, you can go back to BIOS / UEFI to check, or a faster and easier way when you can access Windows, that is:

Use CPU-Z software => then look in the SPD tab as shown below for example:

kich-hoat-xmp-in-bios-2

#8. Is XMP really necessary for RAM?

As far as I know, nearly every popular computer device today, even without XMP enabled, is still capable of fighting games and doing heavy work such as graphics or Render…

However, if you are a fastidious person, or you have knowledge of computers, or you simply want to optimize the speed of your computer to make it as perfect as possible, think about XMP. .

#9. Epilogue

Well, these are the Basics of XMP, as well as a way to activating and using the XMP . feature this. In general, if your computer supports it, you should also turn on this feature to take advantage of the full power of RAM.

I hope you enjoy the information I share with you in this article. And don’t forget to follow the Knowledge Sharing Blog to read the latest articles!

CTV: Le Dinh Hoang Vu – techtipsnreview

Note: Was this article helpful to you? Don’t forget to rate the article, like and share it with your friends and family!


Source: What is XMP? Enable XMP on BIOS/UEFI to optimize RAM
– TechtipsnReview

Leave a Reply

Your email address will not be published. Required fields are marked *