Fix Windows 10 not recognizing USB simply and quickly at home

You will often encounter the error that Windows 10 does not recognize USB and this can stem from many different reasons such as: incompatible USB driver error or USB port error on the computer, … The following article, GhienCongListen Will help you learn how to fix the error Windows 10 does not recognize USB from A to Z.

Before going into troubleshooting Windows 10 not recognizing USB error, you may need to know a few common reasons why Windows 10 won’t recognize USB:

Advertisement

• The USB port is dusty and has poor contact.
• System conflicts and some other software on Windows 10.
• The computer is infected with a virus.
• Missing USB driver or compatible driver error.
• Error formatting USB hard drive.
• The USB port is locked or blocked due to anti-virus software.

Start learning how to fix Windows 10 not recognizing USB with some suggestions from GhienCongList below.

Restart Windows 10

The simplest way to fix this error is to restart your computer or specifically Restart your Windows 10. Sometimes the problem lies in the fact that Windows 10 often automatically downloads and installs system updates and drivers for the machine silently.

Advertisement

This causes the system to fail or lack compatible drivers for USB hardware, leading to errors and the computer not receiving the USB.

To restart Windows 10, do the following: Click the . button Start > select button Shutdown > choose Restart.

Advertisement

Check driver installation

Maybe your computer is missing a USB driver. Please update as follows:

Step 1: Right click on the . icon My Computer > Select Device Manager.

Step 2: In the Universal Serial Bus controllersright click on the line containing the USB with the yellow triangle and exclamation mark icon > Select Update drivers.

Step 3: Select Search automatically for updated driver software.

Step 4: Wait for the computer to search as shown (1) > Complete the remaining steps as shown in Figure (2).

Check USB port

The USB port needs to be cleaned so that there are no problems, distortions or distortions. USB ports on computers are often dusty or with low-quality USB connectors often rust.

Please clean these USB port terminals, after cleaning and checking carefully, plug in the USB and try it.

Check solder joints, chipset in main

The solder joints of the USB port with the main being detached due to strong impact also make Windows 10 not accept USB 3.0.

To fix it, you can remove the device and use a soldering iron to re-dot the solder joints of the USB port with the main pin.

In addition, the chipset error that manages the USB port’s output can also cause Windows 10 to not recognize the USB. To fix this error, it is best to bring your computer to a repair shop to have it checked.

Fix Win 10 error that does not recognize USB Boot to install Windows

Try plugging the USB in the back of the case

If the reason Windows 10 does not recognize the USB is due to a faulty USB port, try plugging the USB into other ports, which can be found on the back of the case.

Try all ports until you can connect.

Restart the BIOS

To reboot the BIOS, you can open the setup menu by pressing the . key DEL or F2.

Next, find the reset option > Enter > Yes To confirm.

So the BIOS has returned to the original default settings.

Turn off disable Secure Boot

Step 1: Restart the computer, enter BIOS mode.

Step 2: Go to Security and select Secure Boot menu.

Step 3: In the Secure boot control section, the button Enabled is on.

Step 4: Disable Secure boot, set it to mode Disabled.

See more:

The above are many ways to fix the error that Windows 10 does not recognize USB that you can refer to and fix immediately for your machine. Don’t forget to follow GhienCongList for more useful information.