Status wifi error can’t connect to the network on the phone Currently there are quite a lot of users encountering. So the cause, how to fix this situation? Please follow up with HC to have a solution to this situation!
Before learning the causes and how to fix the error that the phone cannot access the wifi network, you need to note the following issues:
– Make sure you have turned on the Wifi feature on your phone.
– The Wifi network you want to access is already enabled.
– Make sure you get the correct Wifi password.
– Access to another Wifi network to check.
– Restart the Wifi transmitter Modem device, as well as check whether the network connection ports have loose wires or not.
1. Wifi cannot connect to the network on the phone, when using it, the wifi is lost
The first error cause that you should think about is because phone your own there was an error with the wifi capture. This will greatly affect the transmission of the device to your device.
How to fix the error:
– If you are using Wifi normally but suddenly lost, try turning off the phone.
– Then let the phone rest for a few minutes then reboot.
– This is a common way to fix software conflicts because some minor conflicts cause your device to have trouble catching Wifi signal.
– So, restarting the phone is a way to help fix the error that the phone cannot catch wifi quickly.
– If after booting and still can’t fix the error, try to check your wifi connection again.
2. Phone can’t access WiFi after flashing rom cook
– The cause of the error may be because you have used the trick, the cooking rom update is still applied by some people on old Android smartphones, leading to the phenomenon of the phone not being able to access WiFi or having an error of losing WiFi signal, WiFi feebleness…
– How to fix the error:
You must set a static IP address for the device by following these steps:
Step 1: First, go to the following path: Settings -> Wifi -> Select Wifi network -> Modify/Advandce
Step 2: In the Advanced section, set the parameters as shown below.
Note: The normal IP Address set is 192.169.1.x (Also, you can choose x from 2-254, as long as it doesn’t overlap with other devices)
Step 3: You enter Gateway: 192.168.1.1 (192.168.0.1, 192.168.100.1)
Step 4: You adjust the Netmask: 255.255.255.0
Step 5: Continue to adjust DNS1 to: 8.8.8.8
Step 6: Adjust DNS2 to: 8.8.4.4 (DNS to access Facebook)
Step 7: Finally, you save and you’re done.
See more: Summary of 7 simple and beautiful ways to combine photos on your phone
3. Phone connects to wifi but can’t connect to the network
Beyond the status wifi can not connect to the network on the phone You may encounter a situation where your phone connects to wifi but cannot connect to the network. The causes and solutions are as follows:
– Cause of the error: The phone can connect to wifi but cannot access the network, most likely due to incorrect DNS configuration or incorrect IP address, gateway settings.
How to fix the error:
– First, try using another device to test the network to see how the situation is as well as to see if the error is caused by the line (eg laptop, other wireless device)
– If the wifi network is still running stable, you need to check the DNS, IP, Gateway parameters on the machine by:
Step 1: You go to Settings (configuration / settings)
Step 2: Next, you choose Wifi
Step 3: Then you click “connecting network”
Step 4: Please check the parameters and Parameter information will be displayed in each network.
Step 5: Finally, you check the network cable is connected to the correct wifi.
4. The phone connects to the WiFi intermittently
– The main cause of this error that leads to the phone not being able to catch this wifi may be because you have turned on the battery saving application. When using this application in the state of the device resting, locked, the application will automatically turn off the battery for the wifi antenna.
– How to fix the error:
+ Way 1:
Step 1: You go to settings (configuration).
Step 2: You press to turn off battery saving mode
+ Method 2:
Step 1: You go to Advance in Wi-Fi Settings.
Step 2: You choose Keep Wi-Fi on during sleep (Always – always keep wifi when the device is in sleep mode).
5. Phone error repeats the process of catching WiFi
In addition to the wifi error of not being able to access the network on the phone, some phones have a situation where the phone repeats the process of catching wifi. Manifestations of this error: the phone catches wifi but cannot access the network, the device continuously performs the wifi connection process, the device connects to wifi from time to time.
How to fix the error:
– The problem may arise from the operating system you are using on the machine, the device successfully received the IP address but then broke again >> find a new IP address. The process keeps repeating.
– You should download and install the wifi driver on your device through the Wifi fixer application.
– After installation, users must restart the Wi-Fi router.
– Run the Wifi fixer app: The application will reset the Wi-Fi system files and services and help you connect to the network and get the IP address.
To use this app, follow these steps:
Step 1: Install Wifi Fixer app
Step 2: Restart the Wi-Fi router.
Step 3: Turn on the Wi-Fi Fixer app for Android.
The application will reset the Wi-Fi system files and services and help the user to connect to the network and get the IP address.
Step 4: Swipe the screen from top to bottom > Select Reassociate when the device has problems connecting to the Wi-Fi network.
6. Wifi connection error is limited on the phone
– In addition to wifi not connecting to the network on the phone, the limited connection error is an error you may encounter. This error is quite common with a line of Android phones. When the device cannot access Wifi, try to fix it with the following steps:
Step 1: Make sure the Wifi network you want to access as well as the Wifi settings on the device is turned on (can be turned off and then turned on again by Android’s Wifi option).
Step 2: Access wifi network, can try again and again many times
Step 3: Ask the administrator if the password has been changed.
Step 4: If you have to change the password, go to Settings -> Wireless & networks -> Wifi settings, hold down the name of that Wifi network and select Change password.
Step 5: If you still can’t access a Wifi network you’ve been to before, go to Wifi settings.
Step 6: Long press on the desired Wifi network name, select Forget Network.
Step 7: Then proceed to access normally again as with a new Wifi network. You enter the correct password to remember.
With some genuine Android devices, the error will be fixed after about 2-5 minutes of access.
7. Phone can’t connect to wifi due to hardware
– Wifi error can not connect to the network can come from hardware. The main cause of the error may come from dropping or falling during use. Or users accidentally drop the phone into water, hit hard with hard objects.
– Fix error: with the error of not being able to connect to wifi due to hardware, the best way is to bring it to a reputable phone repair center to replace the genuine wifi antenna
8. Wi-Fi access error has the same IP on the phone
To fix this error, follow these steps:
Step 1: You go to the Settings application > Select Connection.
Step 2: Next, click on Wi-Fi and then select the cog icon.
Step 3: Then go to Advanced. In the IP Settings section, click Static.
Step 4: Reset the IP address and then click Save to finish.
9. Wi-Fi loses connection frequently
In addition to the wifi error, you can’t connect to the network on your phone, but the wifi often loses connection. What is the cause and how to fix it? Follow along right here!
– Cause of the error: The most obvious cause in this situation is Wi-Fi’s battery saving policy (Wi-Fi Sleep Policy), which disconnects Wi-Fi every time the phone goes into Sleep mode. to save battery.
– Solution to fix the error: To fix this situation, follow these steps:
Step 1: You open Advance Wi-Fi Settings on Android
Step 2: You click the option Keep Wi-Fi on during sleep.
Step 3: Here, you tick the Always option.
– At this time, the Wi-Fi connection will not be disconnected when the device is in Sleep mode, but in return, the battery life will be shorter.
– If you’re using an intermediate battery saver app, check if the app is controlling Wi-Fi and other wireless services and configure accordingly.
10. Other wifi connection errors
– If the wifi connection is poor due to external influences, HC recommends that you increase the wifi model, or the wifi repeter to increase the quality of wifi coverage.
– Especially with Wifi Modem devices that have been placed too far from the place of use of the devices or blocked by many different wall layers, affecting the broadcast and reception of wifi signals on each Android device. .
With ways to fix the situation wifi error can’t connect to the network on the phone that HC shares, wish you success and satisfied experiences.
TechtipsNReview.com
Source: 10 Wifi error cannot access the network on the phone and how to fix it
– TechtipsnReview
