Today, TechtipsNReview.com shares with users Daikin air conditioner error 00 Usually occurs over a long period of time. Please read immediately error 00 Daikin Inverter air conditioner in the following article we share at the air conditioner consulting page.
1. What’s wrong with Daikin air conditioner error 00?
Code Daikin air conditioner error 00 is the default display code in the fault test program, when you are using the Daikin air conditioner remote to check the fault code. It’s not that the error is too serious, so don’t worry when Daikin’s cheap genuine air conditioner remote control appears this error.
Or you use a non-genuine Daikin air conditioner controller to check for errors for the air conditioner, only displaying error 00 Daikin air conditioner without any other error.
2. How to display error 00 Daikin air conditioner
To display Daikin air conditioner error 00 please follow our steps below:
– Step 1: Direction “Remote” towards the cooler inside the house.
>> See more:
Things you should know about Daikin air conditioner reports error H0 when using Daikin air conditioners.
Daikin Air Conditioner EA Error: Causes & Fixes.
– Step 2: Press and hold the “Cancel“About 5-6 seconds when there’s a sound”Beep“release, release your hand from the key”Cancel“.
At this time, the display of the remote control will display “error code 00”. This is the default display code in the program “Error testing“.
3. Common errors in Daikin air conditioners
STT |
Error code | Error name is different from error 00 Daikin air conditioner |
first |
A0 |
Error due to external protection device |
2 |
A1 |
Error in circuit board |
3 |
A3 |
Fault in drain level control system (33H) |
4 |
A6 |
Fan motor (MF) is damaged, overloaded |
5 |
A7 |
Defective vane motor |
6 |
A9 |
Electronic throttle error (20E) |
7 |
AF |
Indoor unit drain ink error |
8 |
C4 |
Error in the temperature sensor head (R2T) in the heat exchanger |
9 |
C5 |
Error in the head of the temperature sensor (R3T) of the gas pipeline |
ten |
C9 |
Error in return air temperature sensor (R1T) |
11 |
CJ |
Error at the top of the temperature sensor on the remote control |
twelfth |
E3 |
Error due to the action of the high pressure switch |
13 |
E4 |
Error due to the impact of low pressure sensor |
14 |
U5 |
Error due to signal transmission between indoor unit and remote |
15 |
U7 |
Signal transmission error between outdoor units |
16 |
U8 |
Error in signal transmission between remotes “USA” and “S“ |
17 |
United States |
Error due to exceeding the number of staging air conditioner |
18 |
… | … |
So here is information about Daikin air conditioner error 00. Hope the above information will be of great help to you. Thank you for watching.
TechtipsNReview.com
Source: Cause and how to fix error 00 Daikin air conditioner
– TechtipsnReview
air, conditioner, Daikin, error, Fix