Electrolux air conditioner error E1 is one of the unexpected situations users may encounter during the experience. If you and your family accidentally encounter this error, do not skip the following article to know the cause and how to fix it!
1. What is error E1 on Electrolux air conditioner?
– E1 error code of Electrolux air conditioner will usually be detected as soon as the user turns on the air conditioner to use, error E1 will be reported on the display screen of the device immediately.
– Electrolux air conditioner error E1 is the error of the air sensor, causing the temperature that the air conditioner provides to deviate from the temperature adjusted by the user.
– Electrolux air conditioner sensor has the role of controlling the temperature of air-conditioner and the temperature of the air in the room, so that the air conditioner works more economically, users when using the air conditioner no longer worry about the device consuming a lot of electricity in the family. The thermostat also helps to bring the temperature stability in the room, the indoor unit will automatically adjust the room temperature accordingly so that the user feels comfortable and cool.
– If the ambient temperature in the room has not reached the temperature set by the user, the indoor unit will operate continuously, helping to bring cold air out to lower the room temperature to the required set temperature. Along with that, the compressor of the air conditioner will stop working.
– When the sensor in the Electrolux air conditioner is damaged, this part will no longer work according to the intelligent principle as previously set. The device will not automatically cut off the power when the room temperature has reached the required level, the Electrolux air conditioner will continue to operate until you turn off the device, leading to the phenomenon of running not at the temperature set by the user. The refrigerator will be damaged, the air conditioner is not cool or too cold leading to error E1.
2. The cause of the Electrolux air conditioner error E1.
The cause of this error code on Electrolux air conditioner include the following reasons:
– Faulty room temperature sensor.
– Damaged indoor unit board.
After determining the cause of the E1 error, you can refer to the following fix.
See more: Summary of the latest Electrolux air conditioner error code table
3. How to fix error E1 on Electrolux air conditioner
– In case the Electrolux air conditioner reports error E1 due to a broken room temperature sensor: The error of the room sensor is 90%. It is necessary to check and replace this component to solve the damage.
– In case of E1 error due to a broken indoor unit circuit: The best repair option in this case is to contact a qualified warranty or repair unit to fix it. If you are not professional, it can make the damage worse.
With the above information, I wish you to fix the situation Electrolux air conditioner error E1 succeed and have satisfying experiences with family and friends.
Supermarket electronics HC collectibles.
Source: Causes and how to fix Electrolux air conditioner error E1
– TechtipsnReview
air, conditioner, Electrolux, error, Fix