Using the washing machine improperly can cause the washing machine to fail, if serious, it can damage the whole machine. So in this post GhienCongListen will help you understand one of the most common errors and how to deal with them Electrolux washing machine error E10 Please.
What is error E10 of Electrolux washing machine?
Electrolux washing machines are equipped with a small display in the control panel. When the Electrolux washing machine has an E10 error, the screen will display the letter E10 accompanied by a beep sound and the washing machine does not work.
Advertisement
If the product does not have a display, please see the number of flashes and the color of the light on the 2 keys Start/Pause.
Advertisement
The cause of the Electrolux washing machine error E10
Here are the common causes of Electrolux washing machine error E10. Understanding the cause helps you know how to fix and avoid similar errors in the future use of the washing machine.
- The washing machine does not supply water or does not supply enough water. This could be due to a clogged plumbing or you forgot to open the faucet shutoff valve.
- The water supply filter is clogged.
- Obstruction in detergent and fabric softener trays.
- Waiting time for water supply is too long.
- Because the control circuit has failed in the ICs that can execute the water supply command. Therefore, the washing cycle error of the machine and the machine error E10.
- Electrolux washing machine is equipped with a pressure control valve that controls the amount of water inlet and pump out. If the supply valve is damaged, the washing machine will report error E10.
Advertisement
How to fix Electrolux washing machine error E10
If you have found the reason. Let’s see how to fix the process of using your washing machine more durable. In addition, you also need to pay attention to check the water supply problem for the harvester before washing and drying to avoid the same situation happening.
- Check the water supply: Turn off the faucet and remove the inlet faucet. Place a bucket or other similar container under the faucet. Turn on the faucet and check if enough water is coming out of the faucet. You should be able to fill the 10-liter bucket in about a minute to see if the water supply time is quick or not.
- Clean the filter in the inlet pipe next to the jari: This is the cause of water pipe blockage.
- Clean the pump and filter: Clean the pump and fluff filter, including the pump blade (if the pump blade is visible, rotate it with a pencil and refit the filter). Then start a hot wash without adding any soap powder to clean the drain.
- Check for blocked drains: Check if the drains are satisfactory. Try rinsing with the drain in the bowl or sink.
- Check the drain hose for kinks or twists: Bends or twists in the drain hose can prevent water from flowing through the hose. You can check it on the back of the machine.
Try observing again the Electrolux washing machine error E10, follow the solutions above. If it still does not work, please contact the nearest dealer or service center for processing.
See more:
Above is all the information related to the status of Electrolux washing machine error E10. Hope the article is useful to you. Don’t forget to Like, Share the article so that GhienCongListen has more motivation to make more quality articles.
Source: Causes and ways to fix when Electrolux washing machine shows error e10
– TechtipsnReview