NOTE: Welcome to the Knowledge Sharing Blog! If you encounter any errors during use, such as error in download link, slow loading blog, or unable to access a certain page on the blog … please notify me. via Contact page. Thanks!
Fix the error of failing to install Windows, when installing Win, the error message appears as follows: ” Windows cannot be installed to this hard disk space. The partiton contains one or more Dynamic volume that are not suppord for install “
You can see the error message image below. In fact, this error is very similar to the error of failing to install Win because the hard drive is in the GPT format that I instructed you before, but instead of the hard drive in GPT format, here the hard drive format is Dynamic. .
To fix this error, follow the instructions below:
Note: Please make a backup of your data to a safe place first, because after performing these commands, all data will be deleted.
+ Step 1: To this step, press the key combination Shift + F10
to open the cmd window (for some phones you can’t press Shift + Fn + F10
Please)
+ Step 2: Enter the following commands, note that after each command, press Enter
to do it.
diskpart
list disk
select disk 0
clean
exit
+ Step 3: Click the button Refresh
let it reload.
Okey, after loading is complete, you will notice in the column Type
format will disappear Dynamic
+ Step 4: It’s easy to come here, just install Win as usual ?
If you do not know how to install Windows, you can refer to some detailed instructions below:
Epilogue
Very simple like that, just a few very simple steps you can successfully overcome Error of not being able to install Win because the hard drive is in Dynamic format. Hope this little trick will be helpful to you. Good luck !
Kien Nguyen – techtipsnreview
Note: Was this article helpful to you? Don’t forget to rate, like and share with your friends and relatives!
Source: Fix the error of failing to install Win “Cannot install windows on dynamic disk”
– TechtipsnReview