The reason GhienCongListen much recommend how to fix error code 0x80070035 That’s because there are many causes for this error. One of the top reasons is that the name of the computer you want to connect to is too long. Try renaming that computer and try again. If the error is still there, continue to try the rest of the methods listed below.
Advertisement
12 ways to fix error code 0x80070035
Method 1: Turn on SMB V1.0
1. Go to settings Windows features in Control panel.
Advertisement
2. Tick the box SMB 1.0/SIFS File Sharing Support.
Advertisement
Now try again to see if this has fixed the error code 0x80070035. If not continue to do method 2.
” See more: 7 great ways to fix error 0x80004005 standard without editing
Method 2: Make sure the Sharing feature is turned on
- Right-click on the drive on the computer you want to access, select the item Properties.
- Click the tab Sharing and keep clicking Advanced Sharing…
- Select option Share this folder. Finally click Apply and OK.
Method 3: Use gpedit.msc to fix Error code 0x80070035
- Search “gpedit.msc” in the Windows 10 search box to open the Local Group Policy editor.
- Choose Local Computer Policy > Computer Configuration > Administrative Templates > Network > Lanman Workstation.
- Choose Enable insecure guest logos.
*Note: If it doesn’t work, try below steps.
- Search “gpedit.msc” in the Windows 10 search box to open the Local Group Policy editor.
- Choose Local Computer Policy > Computer Configuration > Windows settings > Security Settings > Security Options.
- Disable Microsoft Network client: Digitally sign communications (always).
Method 4: Turn off anti-virus software and Windows Defender
Different anti-virus software has different ways to turn it off. In general, we open the anti-virus software, then find in the settings the option to disable or disable it temporarily.
As for Windows Defender we do the following:
- Press Win + CHEAP to open the window Runinput “Control panel“. Press Enter.
- In the list of options, click and open Windows Defender Firewall.
- On the left side, click Turn Windows Defender Firewall on or off.
- For Private and Public network settings , select item Turn off Windows Defender Firewall (not recommended).
- 5. Click OK and restart the computer.
Method 5. Reinstall network adapters including hidden adapters
- Press Win + CHEAP to open the window Runinput “devmgmt.msc” and press Enter.
- Click on View in tab Device Manager and tick Show hidden devices.
- Now when you expand the list Device Managerthe Device hidden will show up with brightly colored translucent icons.
- Right click on all the drivers and uninstall them.
Method 6: Enable NetBIOS over TCP/IP
- Press Win + CHEAP to open the window Run and enter the command ncpa.cpl . Press Enter to open properties WIFI .
- Right click on your WiFi network and select Properties .
- Double click Internet Protocol Version 4 to open its properties.
- Click Advanced and move to WINS tab.
- In the settings column NetBIOS select Enable NetBIOS over TCP/IP.
- Click OK and restart the machine to try again.
Method 7: Turn on Network Discovery
- Press Win + CHEAP to open the window Runinput “Control panel“. Press Enter.
- Click Network and Sharing Center.
- From the menu on the left side, select Change Advanced Sharing settings.
- Switch to select mode Turn on network discovery then select the cell with the content Turn on automatic setup of network connected devices.
Method 8. Remove All Windows Login Information
- Press Win + CHEAP to open the window Runinput “Control panel“. Press Enter.
- Choose Credential Manager from options.
- In section Windows Credential section delete all logins and reboot the system.
- Click Add a Windows Credential on the same page and manually add the credentials.
Method 9: Fix error code 0x80070035- Modify Network Security settings
- Press Win + CHEAP to open the window Run and type the command “secpol.msc” and press Enter.
- Navigate to the path Local Policies > Security Options.
- In the right area, double click and open Properties > Network security > LAN Manager authentication level.
- From the drop-down menu, select Send LM & NTLM-use NTLMv2 session security if negotiated.
Method 10: Using Command Prompt
- Press Win + CHEAP to open the window Runinput “Command Prompt“. Press Enter.
- Type each of the following commands into the Command Prompt and press Enter.
ipconfig /release ipconfig /flushdns ipconfig /renew
Restart the system and check if it helps. If not, try the following command.
ipconfig / flushdns nbtstat –r netsh int ip reset netsh wonock reset
Method 11: Reset TCP/IP.
- Press Win + CHEAP to open the window Run and type the command “ncpa.cpl“. Click Enter to open the window Network connection.
- Right click on Ethernet yours and choose Properties .
- Click Install.
- Choose Protocol and click Add…
- Choose Reliable Multicast Protocol and choose OK.
Method 12: Connect to the target computer by IP
- 1. Open Command prompt in the target computer.
- 2. Run below command in window Command Prompt.
ipconfig / all
- Note down your IP from the IPv4 Address line.
- Now press the . key Windows + CHEAP .
- Import \ IPv4 address drive you want to access and click OK.
For example, if my Ip address is 192.168.12.131 and the Drive I’m on is C:, then I would try: – \192.168.12.131c
Above, GhienCongList introduced 12 ways fix error code 0x80070035. If you found this article useful, don’t forget to Like & Share. If you have any questions or comments, please leave a comment and rate the content below the article. Good luck.
See more:
Source: How to fix error code 0x80070035 path not found
– TechtipsnReview