Summary of today’s popular air conditioning unit sizes

Quite a few consumers wonder about the size of the air conditioner unit when choosing to buy products. If you also have this question, do not skip the following article to get the most accurate answer!

1. Some basic information about the air conditioner unit

Before coming to the detailed dimensions of the air conditioner, please refer to some information about this part of the unit air conditioning The following.

1.1. What is an air conditioner?

The air conditioner unit is a part of the air conditioner that helps to cool the air and clean the air as it passes through it.

1.2. Structure and function of the air conditioner unit

– Air conditioning unit in 1-way air conditioner nice 2-way air conditioner All are absorbing heat in the room to bring out to the environment. The structure of the refrigerator consists of 3 parts: the indoor unit, the indoor unit fan and the control panel.

– The air conditioner indoor unit is the main part of the cold unit, this is the thick aluminum foil (or copper foil) heatsink that covers the outside of the copper pipes, containing the refrigerant inside.

– The indoor unit will absorb heat in the air when the indoor unit fan sucks through it, the air going out of the indoor unit will have a lower and cleaner temperature because the dirt has been largely retained in the filter and indoor unit.

2. Dimensions of the air conditioner unit

The size of the popular air conditioning indoor unit is quite diverse, mainly classified according to the capacity of the product. Details are as follows:

However, depending on the company, there will be changes in basic design as well as technology, so the above size is for reference only and there will be a certain error. You should contact the sales unit or check the detailed specifications of each product for the most accurate advice.

See more: Summary of 5 popular sizes of air conditioner heaters today

3. The distance between the hot and cold air conditioner needs to know

Outside size of air conditioner unitWhen installing the air conditioner, it is necessary to note the distance between the cold unit and the hot unit as follows:

– The installation of air conditioners requires a lot of factors, especially the distance between the hot and cold air conditioners. Installing a distance between a standard air conditioner heater and a cold unit will help preserve durability and monthly electricity.

– To inverter air conditioner For the best and most durable operation, the distance between the hot and cold air conditioners that manufacturers offer with residential air conditioners is from 3-7m and no more than 12m high (The distance between the hot and cold air conditioners is 3-7m). cold also depends on the terrain and specific location).

– If you install indoor and outdoor units under 3m, the machine will still run, but the life of the compressor will be low, and the repair cost will be high. In addition, the distance between the hot and cold units below 3m will cause noise.

– The maximum height between the hot unit and the cold unit is recommended to be 12m. If the height of the hot air conditioner is higher than the cold one, once the block compresses the refrigerant circulating in the system, it will mix with the oil of the machine, causing the block to burn. To overcome this situation, when installing an air conditioner that has a too high heat unit, the air conditioner will trap oil at the push end of the block, preventing oil from entering the indoor unit.

– In addition, the distance between the hot and cold units depends a lot on the design of each house. The appropriate distance between the hot and cold units must ensure factors such as: Ease of installation, aesthetics, ease of disassembly and maintenance.

With information about the size of the air conditioner unit Above, hope you get a satisfactory answer. Thanks for watching.

TechtipsNReview.com