Board Samsung air conditioner error code is one of the important information that many users are interested in during the use of the product. If your family owns a Samsung air conditioner, do not ignore the useful information right in the following article to know the cause and how to fix it correctly!
1. Common error codes in Samsung air conditioners
The following are the error codes users may encounter when using Samsung air conditioner often. Please follow the details below.
| STT | Error code | Error name |
| first | E1- and Er-E1 | – Room temperature sensor error |
| 2 | E2, Er-E5 and Er-05 | – Indoor unit temperature sensor error |
| 3 | E3, E3-01 | – Indoor unit fan motor error, or fan signal |
| 4 | E6 and E6-06 | – Signal error of outdoor/cold unit |
| 5 | Er-11 | – The air conditioner has an abnormal increase in current |
| 6 | Er-12 and Er-13 | – Error of temperature rise |
| 7 | Er-14 | – Inverter mainboard error |
| 8 | Er-15 | – Error of the outdoor unit cooling system, possibly overheating of the outdoor unit. |
| 9 | Er-10 | – Error of compressor, control board |
| ten | Er-E6 | – Temperature sensor error |
| 11 | Er-31 | – Error of outdoor temperature sensor |
| twelfth | Er-32, Er-33 | – Error of exhaust temperature sensor sensor |
| 13 | Er-17 | – Error of two parts on the inverter board (outdoor unit) |
| 14 | Er-36, Er-37 | – Error of the motherboard’s heat sink sensor |
2. Common Samsung inverter air conditioner error code table
For Samsung inverter air conditioners, you may also encounter the following common error codes.
| STT | Error code | Error name |
| first | E1 01 | – Error of indoor unit without signal, need to check the wiring again |
| 2 | E1 02, E2 02 | – Error of outdoor unit without signal |
| 3 | E1 21 | – Room sensor error |
| 4 | E1 22, E1 23, E1 28 | – Sansol gas indoor unit error |
| 5 | E1 30 | – Gas sensor error |
| 6 | E1 54 | – Fan error, indoor unit signal error |
| 7 | E1 61 | – Sync error of hot/cold unit |
| 8 | E1 62 | – Samsung air conditioner error code says this is a motherboard error |
| 9 | E1 63 | – Error code option setting error |
| ten | E1 85 | – Power/signal cable fault |
| 11 | E2 01 | – Unusual indoor unit error |
| twelfth | E2 03 | – Signal error between 2 outdoor unit boards |
| 13 | E2 21 | – Error of outdoor unit wind sensor |
| 14 | E2 37, E2 46 | – Error of outdoor unit gas sensor |
| 15 | E2 51, E2 60, E2 61 | – Sensor block error |
| 16 | E2 59 | – Error of outdoor unit |
| 17 | E3 20 | – Error of heat sensor block |
| 18 | E4 01 | – Indoor unit heat exchanger, condensing refrigerant compressor temperature. |
| 19 | E4 04 | – Heating mode protection fault (side overload, compressor stop). |
*** Note: In addition to the Samsung air conditioner error code common, you can also encounter other damaged conditions that are easy to see with the naked eye. Here are some common errors with causes and solutions. Please follow up.
| STT | Error name | Reason | How to fix |
| first | – The air conditioner runs for 3-10 seconds and then stops | – Faulty indoor unit circuit (The machine is operating naturally, the air conditioner will not turn on the light, turn it on for about 3-10 seconds and it will be the same again.) | – Need to call the service and repair center for support. |
| 2 | – Air conditioner leaking water | – Install sewage pipes without slope, use the time when the trough is full to prevent water from escaping. | – Repeat the reset correctly. |
| 3 | – Air conditioner is on but not working | – The power supply does not enter, or the controller does not receive a signal |
– Check the power supply, the connection wire is not broken. – Check the fuse, the aptomat is on or not, the circuit breaker is not broken. |
| 4 | – Air conditioner runs but not cold | – The filter is dirty
– Loss of gas |
– Clean the filter again – Check the gas pipe. |
See more: Summary of 7+ popular and favorite Samsung air conditioning modes
3. Tips for using Samsung air conditioners/air conditioners effectively and save electricity
In addition to the Samsung air conditioner error code, in order to have a satisfied experience during the use process, please refer to the following effective and energy-saving tips.
– Choose a Samsung air conditioner with the right capacity: The right capacity helps to ensure cooling efficiency, avoids the air conditioner from having to run continuously at high capacity, consumes more power than usual, but also helps to ensure the temperature durable, stable operation for air conditioner.
– Put air conditioning in the right place
Regular cleaning and maintenance of air conditioners helps to ensure that your air conditioner operates stably, increases its durability and saves electricity bills.
– Do not turn on and off Samsung air conditioner continuously and turn off the air conditioner 30 minutes before going out
– Set the appropriate temperature: From 24 to 28 degrees is the right temperature range so that your body does not feel too hot or too cold and is good for health.
– Use sleep mode or shutdown timer at night
– Choose inverter air conditioner to save electricity.
With table Samsung air conditioner error code Full, detailed above, hope you find the cause and how to fix it if you accidentally encounter unexpected situations.
Supermarket electronics HC collectibles.
Source: Summary table of Samsung air conditioner error codes detailed, latest
– TechtipsnReview
