Synthesize 7+ Funiki air conditioning modes that are good for health and save electricity

Funiki air conditioning mode Good for health, saving electricity is information that many users are interested in during use. If your family owns this product, don’t skip the following article to get more useful information!

1. AUTO mode on Funiki air conditioner

– When Funiki air conditioner In Auto mode, the device will automatically adjust the temperature, humidity and rotation speed of the blower through the device’s smart sensor system. Auto mode in the air conditioner is the safest and most comfortable, avoiding too large a temperature difference with the outside environment.

– In Auto mode, the fan will rotate gently for a period of 1 minute. Then the Funiki air conditioner will automatically assign the most suitable setting program based on the current temperature of the outside environment. If the air conditioner has been set to auto mode, when the room temperature changes, the mode will not change. But if during the cooling process, the room temperature drops below 22 degrees, the machine will run heating mode if it is a 2-way air conditioner.

Funiki air conditioning mode: Auto mode

2. COOL mode on Funiki air conditioner

– In these Funiki air conditioning mode, COOL is the fast cooling mode and is also used by most people on Funiki air conditioners. In principle, COOL works by drawing hot air in the room into the indoor unit. Here, the air will be cooled and blown back into the room, helping to lower the temperature quickly.

See more:  How to check supported power status on Windows 11

– COOL mode is the mode that brings the highest and fastest cooling efficiency. However, because the air compressor must operate continuously with high capacity, to compress the gas and cool the air, the COOL mode consumes a lot of power. Therefore, when you want to quickly enjoy the cool atmosphere, you should turn on the COOL mode. Once the required temperature has been reached, you should switch air conditioning switch to a more suitable and power-saving mode.

3. FAN mode on Funiki air conditioner

Funiki air conditioning mode: Fan mode

The fan mode of the air conditioner has the main effect of circulating air in the room without cooling. However, if you have one, use a ceiling fan because it is more useful.

4. Funiki Air Conditioning Modes: DRY . Mode

– Dry is a mode on Funiki air conditioners to help reduce humidity in the air, often used in days with high humidity. The mechanism of operation of Dry mode is to draw less moisture from the air in the room to the environment and return the room to a drier atmosphere that makes you feel cooler. Because the dehumidification feature is mainly turned on, the compressor and fan are not used much, so this mode helps to save more power.

– The time to use this mode on the Funiki air conditioner should also be encapsulated in a period of 1-2 hours. If this time is over, it can cause some bad side effects for the body such as dry skin, eyestrain, skin irritation, etc.

5. HEAT mode on Funiki air conditioner

Funiki air conditioning mode: Heat mode

– HEAT mode (or heating mode, hot mode) on Funiki air conditioners is an operating mode only available on 2-way air conditioners. When the heating mode is started, the air inside the room will be heated.

See more:  5 Tips to split Windows 10 screen quickly and effectively

6. Eco . energy-saving operation mode

– In Funiki air conditioning mode, Eco mode helps users adjust the temperature to suit the room, allowing to control the compressor frequency as low as 15 Hz, thereby adjusting the effective cooling mode. This not only provides optimal cooling, but also saves up to 60% of energy compared to conventional mode.

Funiki air conditioning mode: Eco mode

See more: Instructions on how to reset Funiki air conditioners simply, effectively and quickly

7. Sleep function Sleep

– SLEEP mode is one of the favorite Funiki air conditioning modes. Is a new mode of Funiki air conditioner that both saves electricity and helps protect the health of users. SLEEP mode is only operated in parallel with COOL cooling mode, specifically as follows:

– When it is started, after a certain period of time, usually 1 hour, the temperature of the air conditioner will increase to 1 degree Celsius, up to 29 degrees and keep this state. After 10 hours of operation in SLEEP mode, the air conditioner will stop working.

Funiki air conditioning mode: Sleep mode

8. Timer mode on Funiki air conditioner

– Timer mode allows you to turn on or off the Funiki air conditioner after a certain period of time. You just need to proceed with the settings in the timer frame of the air conditioner control. You can set this mode to make the air conditioner turn off automatically at night, avoiding wasting money and energy.

With information about the Funiki air conditioning mode Good for health, save electricity above, wish you have a satisfied experience with the product with family and friends.

See more:  Cause of Daikin air conditioner H0 error - How to fix it quickly

Supermarket electronics HC collectibles.

Source: Synthesize 7+ Funiki air conditioning modes that are good for health and save electricity

– TechtipsnReview

, , , , , , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *