Air conditioner only has wind but not cool: What’s the reason?

When using the air conditioner in the hottest days, your air conditioner suddenly occurs the phenomenon of only wind but not cool. So how to fix the condition that the air conditioner only has wind but not cool: What is the cause? The answer will be in the article below:

Due to wrong setting of cooling mode

Even though you have turned on the air conditioner to the maximum possible wind mode because you set the wrong cooling mode or mistakenly pressed other functions, the air conditioner still turns on without cooling … If you are sure that you have set it If the cooling mode is correct, this step can be skipped.

Due to wrong setting of cooling mode

How to fix:

On the air conditioner control, there are many different symbols, with each symbol being a separate feature:

– Cool: Snowflake shape

See more:  How to install Windows Server 2022 on a virtual machine

– Dry: Water drop shape

– Heating mode: Sun shape

– Auto mode.

Because the air conditioner is too dirty

If you use it for a long time without cleaning or sanitizing, improper maintenance of the air conditioner will cause a lot of dirt to accumulate in the air conditioner that does not cool the air when you turn it on.

How to fix:

To fix the problem of the air conditioner not cooling because it is too dirty, you should maintain and clean the air conditioner. Besides, you remember to clean the air conditioner every 4-6 months to help use the air conditioner more effectively as well as increase the life of the air conditioner.

Air conditioner runs out of gas or lacks gas

Air conditioner runs out of gas or lacks gas

One of the familiar reasons many people think of when the air conditioner does not cool is running out of gas, or lack of gas, you should not rush to call an air conditioner repairman to refill gas, but follow 2 steps. above first, if it doesn’t work, think about gas problems.

– Air conditioner not cool

– There is snow on the small pipe valve of the outdoor unit.

– Electricity operating level is lower than the power consumption of the machine.

– The pressure on the compressor is lower than the normal pressure

– There are many air conditioner lines when there is a shortage of gas or out of gas, the phenomenon is automatically stopped working and an error is reported on the indoor unit.

How to fix:

To overcome the situation that the air conditioner is not cool due to the lack of gas or lack of gas, you should call a reputable technician to come to support, refill gas for the air conditioner to return to normal operation. On the market there are many different types of gas such as gas R32, R410, … the price is also different, so if you are not sure what type of gas, you should find out what type of gas your home uses based on the model. let’s see.

See more:  21 Awesome Screensavers that protect the Windows 10 computer screen

Air conditioner condenser

Air conditioner condenser

The cause of damage to the air conditioner condenser is because the part is located in the outdoor unit, so it is affected by the weather, the temperature is very large.

How to fix:

When the air conditioner is not cool due to the failure of the condenser, the repair method requires you to have technical knowledge and know the steps, it is best to find a mechanic to repair or replace a new capacitor. Besides, you should pay attention to the following things so that the air conditioner capacitor is no longer damaged:

– Set a timer or leave it in automatic mode if the air conditioner can adjust the most suitable temperature.

– Should turn on the air conditioner with mode 25 – 27 degrees C.

Electricity is overloaded

During the hot summer season, the demand for electricity increases, so the problem of power overload is frequent. When the air conditioner does not have enough power to use, the compressor and engine block will heat up, causing the air conditioner to not be able to cool enough.

How to fix:

You should buy a stable voltage stabilizer for your home so that the power supply to your family is always stable and ensures that the air conditioner has enough power to use.

Air conditioner leaking water

 Air conditioner leaking water

When the air conditioner is leaking water, it will make the moss in the pipe appear more and more, causing the drain pipe to be blocked. At that time, the water in the pipe cannot escape to the outside, causing stagnation.

See more:  Instructions on how to turn off the Windows 10 standby screen simply

How to fix:

You should go to a maintenance center, an address that provides air conditioning repair and installation services to be able to fix problems, clean or replace new water pipes for your air conditioning equipment.

Air conditioner capacity is not cool enough

The air conditioner is not cool because you install an air conditioner with a capacity that is not suitable for the room area.. This air conditioner capacity is governed by many things such as the heat source in the room, building materials, room size, number of number of users…

Air conditioner capacity is not cool enough

How to fix:

When buying an air conditioner, it is important to consider the area of ​​the room that you want to install the air conditioner on:

– Rooms under 15m2 should use air conditioners with a capacity of 9000 BTU.

– Room from 15-20m2 should choose to buy an air conditioner with an operating capacity of 12000 BTU.

– Rooms from 20 – 30m2 should choose an air conditioner with a capacity of 18000 BTU.

– Room from 30-40m2 should choose to buy an air conditioner with a capacity of 24000 BTU.

Through the above article, you can easily handle the situation when the air conditioner is windy but not cool, with the above simple fixes to help you use the air conditioner more effectively and safely.

Source: Air conditioner only has wind but not cool: What’s the reason?

– TechtipsnReview

, , , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *